This page was created by the IDL library routine
mk_html_help2.
Last modified: Wed Apr 7 16:22:55 1999.
PROCEDURE: cart_to_sphere2, x, y, z, r, lamda, phi PURPOSE: transform from cartesian to spherical coordinates INPUTS: x, y, z (array or scaler) OUTPUTS: r, lamda, phi (same as x,y,z) CREATED BY: Tai Phan (modified from Davin's procedure) LAST MODIFICATION: @(#)cart_to_sphere.pro 1.4 95/08/24 NOTES: Lamda and phi are different from Cart_to_sphere's theta and phi
(See /disks/aeolus/disk1/wind/source/idl/wind/cart_to_sphere2.pro)
PROCEDURE change_pkquality, pkquality PURPOSE: Change the level of packet quality used when filtering packets through the WIND decommutation software. INPUTS: pkquality: set bits to determine level of packet quality. the following bits will allow packets with these possible quality problems through the decommutator filter: 1: frame contains some fill data 2: the following packet is invalid 4: packet contains fill data the most conservative option is to set pkquality = 0 CREATED BY: Peter Schroeder LAST MODIFICATION: @(#)change_pkquality.pro 1.1 97/12/18
(See /disks/aeolus/disk1/wind/source/idl/wind/change_pkquality.pro)
PROCEDURE: convert_sst_units
PURPOSE: to convert units of data from the sst instruments
INPUT:
data: A 3d structure such as those generated by get_sf,get_so
units: A string telling the procedure which units to convert to, such
as ncounts,rate,nrate,eflux,flux,df
KEYWORDS:
scale: A named variable in which the scale factor is returned.
SEE ALSO:
"CONV_UNITS",
"GET_SF","GET_SO"
WARNING:
This procedure is NOT tested!
CREATED BY: Davin Larson, 1995
LAST MODIFICATION: @(#)convert_sst_units.pro 1.10 96/08/22
(See /disks/aeolus/disk1/wind/source/idl/wind/convert_sst_units.pro)
FUNCTION get_3d_struct, time
INPUTS:
t: double (seconds since 1970., >1990)
or t: string (format: YY-MM-DD/HH:MM:SS)
or t: numeric (hours from reference date. < )
or t: string (format: HH:MM:SS hours from reference date)
options: intarray (only first element is considered to determine instrument)
KEYWORDS: advance: if set, advance to the next time
OUTPUT: A structure that contains all pertinent information for a single
3D sample.
CREATED BY: Davin Larson
LAST MODIFICATION: @(#)get_3d_struct.pro 1.32 98/10/02
NOTE: This routine should NOT be called by users. Should only be called by one
of the routines: get_el, get_eh, get_ph, get_pl, get_sf, get_so
e.g. "GET_EL"
(See /disks/aeolus/disk1/wind/source/idl/wind/get_3d_struct.pro)
FUNCTION; get_bkg3d,dat
PURPOSE: Uses energy steps defined by esteps array, computes average
count rate in those steps and then copies that average value into all
data values. Each angle bin is treated separately. The result can be
used for background subtraction.
INPUT:
dat: 3d data structure such as is generated by
"GET_EL" and other get routines
KEYWORDS
ESTEPS: Two element array of integers that corresponds to the first
and last energy steps to be used. (default is [0,3])
CREATED BY: Davin Larson
LAST MODIFICATION: @(#)get_bkg3d.pro 1.8 96/04/17
WARNING! This is a crude subroutine. Use at your own risk.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_bkg3d.pro)
PROCEDURE: get_eatod PURPOSE: Gets analog to digital data for EESA INPUT: none, but "LOAD_3DP_DATA" must be called 1st. KEYWORDS: DATA: named variable in which all data is returned. CREATED BY: Davin Larson FILE: get_eatod.pro VERSION: 1.5 LAST MODIFICATION: 98/01/06
(See /disks/aeolus/disk1/wind/source/idl/wind/get_eatod.pro)
FUNCTION: get_eh(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
eesa high 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_eh.pro 1.23 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_eh.pro)
FUNCTION: get_ehs(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return an array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
eesa high slice 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_ehs.pro 1.8 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ehs.pro)
FUNCTION: get_el(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return an array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
eesa low 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_el.pro 1.28 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_el.pro)
FUNCTION: get_elb(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
eesa low 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_elb.pro 1.13 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_elb.pro)
FUNCTION: get_elc(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return an array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
eesa low cut 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_elc.pro 1.10 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_elc.pro)
FUNCTION: get_elm(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
eesa low 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_elm.pro 1.6 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_elm.pro)
PROCEDURE: get_emom PURPOSE: Gets moment data for eesa, including velocity,density,and temperature. INPUT: none, but "LOAD_3DP_DATA" must be called 1st. KEYWORDS: dens: Optionally returns density directly as well as storing it. temp: Optionally returns temperature directly as well as storing it. vx: Optionally returns vx directly as well as storing it. vy: Optionally returns vy directly as well as storing it. vz: Optionally returns vz directly as well as storing it. pe: Optionally returns Pe directly as well as storing it. qe: Optionally returns Qe directly as well as storing it. CREATED BY: Davin Larson LAST MODIFICATION: @(#)get_emom.pro 1.9 97/09/08
(See /disks/aeolus/disk1/wind/source/idl/wind/get_emom.pro)
PROCEDURE: get_emom2 PURPOSE: Gets eesa moment structure. INPUT: none, but "LOAD_3DP_DATA" must be called 1st. KEYWORDS: POLAR VTHERMAL CREATED BY: Davin Larson FILE: get_emom2.pro VERSION: 1.3 LAST MODIFICATION: 97/11/14
(See /disks/aeolus/disk1/wind/source/idl/wind/get_emom2.pro)
FUNCTION: get_fpc(t)
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a structure containing all data pertinent to a single
correlator sample. See the file 3dp_help.doc for a more complete
description of the structure.
CREATED BY: Jonathan Loran
LAST MODIFICATION: @(#)get_fpc.pro 1.4 01/29/98
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_fpc.pro)
PROCEDURE: get_frame_info PURPOSE: Gets frame info data for WIND data files. INPUT: none, but "LOAD_3DP_DATA" must be called 1st. KEYWORDS: DATA: named variable in which all data is returned. CREATED BY: Davin Larson FILE: get_eatod.pro VERSION: 1.4 LAST MODIFICATION: 96/05/03
(See /disks/aeolus/disk1/wind/source/idl/wind/get_frame_info.pro)
FUNCTION: get_fspb(t)
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns structure containing all data pertinent to a single
foil burst spectra. See the file 3dp_help.doc for a more complete
description of the structure.
CREATED BY: Robert D. Campbell
FILENAME: get_fspb.pro
VERSION: 1.4
LAST MODIFICATION: 96/04/09
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_fspb.pro)
FUNCTION: get_fspc(t)
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns structure containing all data pertinent to a single
foil spectra. See the file 3dp_help.doc for a more complete
description of the structure.
CREATED BY: Robert D. Campbell
FILENAME: get_fspc.pro
VERSION: 1.8
LAST MODIFICATION: 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_fspc.pro)
FUNCTION: get_ft6t
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
PURPOSE:
for omniazimuuth average flux if electrons, for survey plots
from SST foil+thick 3d data
data from 402x packets
produces array (FT6) for tplot
CREATED BY: Robert D. Campbell
FILENAME: get_ft6t.pro
VERSION: 1.2
LAST MODIFICATION: 95/10/06
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ft6t.pro)
PROCEDURE: get_hkp
PURPOSE:
Gets housekeeping data for eesa and pesa;
INPUT:
none, but "LOAD_3DP_DATA" must be called 1st.
CREATED BY: Davin Larson
LAST MODIFICATION: @(#)get_hkp.pro 1.14 97/02/25
(See /disks/aeolus/disk1/wind/source/idl/wind/get_hkp.pro)
PROCEDURE: get_latest_dates
PURPOSE: look at wi_lz_3dp_files.new and see what dates the
files in it have
This is useful because you can call this from a procedure
like "MAKE_PLOT" to do something
with the latest data.
INPUTS: none
KEYWORDS: none
CREATED BY: Jasper Halekas
LAST MODIFICATION: @(#)get_latest_dates.pro 1.4 95/10/06
(See /disks/aeolus/disk1/wind/source/idl/wind/get_latest_dates.pro)
FUNCTION: get_ospb(t)
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a structure containing all data pertinent to a single
open burst spectra. See the file 3dp_help.doc for a more complete
description of the structure.
CREATED BY: Robert D. Campbell
FILENAME: get_ospb.pro
VERSION: 1.4
LAST MODIFICATION: 96/04/09
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ospb.pro)
FUNCTION: get_ospc(t)
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a structure containing all data pertinent to a single
open spectra. See the file 3dp_help.doc for a more complete
description of the structure.
CREATED BY: Robert D. Campbell
FILENAME: get_ospc.pro
VERSION: 1.8
LAST MODIFICATION: 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ospc.pro)
FUNCTION: get_ot6t
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
PURPOSE:
for omniazimuuth average flux if electrons, for survey plots
from SST open+thick 3d data
data from 402x packets
produces array (OT6) for tplot
CREATED BY: Robert D. Campbell
FILENAME: get_ot6t.pro
VERSION: 1.2
LAST MODIFICATION: 95/10/06
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ot6t.pro)
PROCEDURE: get_padflux,source,symm_dir
PURPOSE: Calculates flux from eesa_L and mfi data. You are expected to
have loaded these already using
"GET_MFI".
INPUT:
source: (string) source of 3d data (ie. 'el')
symm_dir: (string) handle of symmetry direction data (ie. 'Bexp')
KEYWORDS:
units: units to convert to
bins: bins to sum over
CREATED BY: Davin Larson
LAST MODIFICATION: @(#)get_padflux.pro 1.8 96/01/18
(See /disks/aeolus/disk1/wind/source/idl/wind/get_padflux.pro)
FUNCTION: get_ph(t)
PURPOSE:
Returns a 3d structure containing all data pertinent to a single pesa high 3d sample.
See "3D_STRUCTURE" for a more complete
description of the structure.
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
CREATED BY: Frank Marcoline from Davin Larson's get_##.pro routines.
LAST MODIFICATION: @(#)get_ph.pro 1.30 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ph.pro)
FUNCTION: get_ph30(t)
PURPOSE:
Get a 30 energy step ph structure containing the center (sunward) bins.
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
CREATED BY: Frank Marcoline from Davin Larson's get_##.pro routines.
LAST MODIFICATION: @(#)get_ph30.pro 1.4 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ph30.pro)
FUNCTION: get_phb(t)
PURPOSE:
Returns a 3d structure containing all data pertinent to a single pesa high
burst 3d sample.
See "3D_STRUCTURE" for a more complete
description of the structure.
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
CREATED BY: Peter Schroeder
LAST MODIFICATION: @(#)get_phb.pro 1.14 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_phb.pro)
NAME: get_phb_mapcode
PURPOSE:
get the current mapcode for phb
see map3d.c for definitions of mapcodes
typically get_ph_mapcode will only be called from other get_ph* routines
CALLING SEQUENCE: type=get_ph_ph_type(t,advance=advance,index=index,preset=preset)
INPUTS: t: double or dblarr(2) time
KEYWORD PARAMETERS: ADVANCE: get the mapcode for the next ph packet
INDEX: get the mapcode for the ph packet with index INDEX
OPTIONS: options array decides how the packet is chosen:
IF OPTIONS(1) GE 0, get packet by index
IF OPTIONS(1) EQ -1, get packet by time
PRESET: If set: t, advance, and index are preset
and no changes to these variables will be made
OUTPUTS: At the moment there are only two possible valid outputs
1: MAP11b, or 2: MAP11d (constants defined in map3d.h)
COMMON BLOCKS: wind_com
EXAMPLE: load_3dp_data,'1995-09-28',24
map0 = get_phb_mapcode(index=0)
map1 = get_phb_mapcode(str_to_time('1995-09-28/20'))
print,'Map0: ',map0,', Map1: ',map1,format='(a,z,a,z)'
--> Map0: D4A4, Map1: D4FE
;on 9/28/95 the telemetry rate changed from S2x to S1x
;See: http://sprg.ssl.berkeley.edu/wind3dp/wi_3dp_log
CREATED BY: Peter Schroeder
(See /disks/aeolus/disk1/wind/source/idl/wind/get_phb_mapcode.pro)
NAME: get_ph_mapcode
PURPOSE:
get the current mapcode for ph
see map3d.c for definitions of mapcodes
typically get_ph_mapcode will only be called from other get_ph* routines
CALLING SEQUENCE: type=get_ph_ph_type(t,advance=advance,index=index,preset=preset)
INPUTS: t: double or dblarr(2) time
KEYWORD PARAMETERS: ADVANCE: get the mapcode for the next ph packet
INDEX: get the mapcode for the ph packet with index INDEX
OPTIONS: options array decides how the packet is chosen:
IF OPTIONS(1) GE 0, get packet by index
IF OPTIONS(1) EQ -1, get packet by time
PRESET: If set: t, advance, and index are preset
and no changes to these variables will be made
OUTPUTS: At the moment there are only two possible valid outputs
1: MAP11b, or 2: MAP11d (constants defined in map3d.h)
COMMON BLOCKS: wind_com
EXAMPLE: load_3dp_data,'1995-09-28',24
map0 = get_ph_mapcode(index=0)
map1 = get_ph_mapcode(str_to_time('1995-09-28/20'))
print,'Map0: ',map0,', Map1: ',map1,format='(a,z,a,z)'
--> Map0: D4A4, Map1: D4FE
;on 9/28/95 the telemetry rate changed from S2x to S1x
;See: http://sprg.ssl.berkeley.edu/wind3dp/wi_3dp_log
CREATED BY: Frank Marcoline
(See /disks/aeolus/disk1/wind/source/idl/wind/get_ph_mapcode.pro)
FUNCTION: get_pl(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
pesa low 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Davin Larson
LAST MODIFICATION: @(#)get_pl.pro 1.23 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_pl.pro)
FUNCTION: get_plb(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance: advance to the next data point
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
pesa low 3d sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFICATION: @(#)get_plb.pro 1.16 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_plb.pro)
PROCEDURE: get_pmom PURPOSE: Gets moment data for pesa, including velocity,density,and temperature. INPUT: none, but "LOAD_3DP_DATA" must be called first. KEYWORDS: NONE. CREATED BY: Davin Larson FILE: get_pmom.pro VERSION: 1.13 LAST MODIFICATION: 97/09/08
(See /disks/aeolus/disk1/wind/source/idl/wind/get_pmom.pro)
PROCEDURE: get_pmom2 PURPOSE: Gets pesa moment structure. INPUT: none, but "LOAD_3DP_DATA" must be called 1st. KEYWORDS: POLAR VTHERMAL CREATED BY: Davin Larson FILE: get_pmom2.pro VERSION: 1.3 LAST MODIFICATION: 99/03/02
(See /disks/aeolus/disk1/wind/source/idl/wind/get_pmom2.pro)
PROCEDURE: get_sdotb PURPOSE: INPUT: none KEYWORDS: none CREATED BY: Davin Larson LAST MODIFICATION: @(#)get_sdotb.pro 1.3 95/08/24
(See /disks/aeolus/disk1/wind/source/idl/wind/get_sdotb.pro)
FUNCTION: get_sf(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
chanmode: if set, load only channels that are read out for
the selected packet.
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
SST Foil sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_sf.pro 1.28 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_sf.pro)
FUNCTION: get_sfb(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
SST Foil burst sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: %W% %E%
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_sfb.pro)
FUNCTION: get_sft(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
chanmode: if set, load only channels that are read out for
the selected packet.
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
SST Foil sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_sft.pro 1.10 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_sft.pro)
FUNCTION: get_so(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
chanmode: if set, load only channels that are read out for
the selected packet.
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
SST Open sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_so.pro 1.21 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_so.pro)
FUNCTION: get_sob(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
SST Open Burst sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_sob.pro 1.8 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_sob.pro)
FUNCTION: get_sot(t)
INPUT:
t: double, seconds since 1970. If this time is a vector then the
routine will get all samples in between the two times in the
vector
KEYWORDS:
chanmode: if set, load only channels that are read out for
the selected packet.
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a 3d structure containing all data pertinent to a single
SST Open sample. See "3D_STRUCTURE" for a more complete
description of the structure.
CREATED BY: Peter Schroeder
LAST MODIFIED: @(#)get_sot.pro 1.8 99/03/02
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_sot.pro)
PROCEDURE: get_spec
PURPOSE:
Creates "TPLOT" variable by summing 3D data over selected angle bins.
INPUT: data_str, a string(either 'eh','el','ph','pl','sf',or 'so' at
this point) telling which data to get.
KEYWORDS: bins: a keyword telling which bins to sum over
gap_time: time gap big enough to signify a data gap (def 200)
no_data: returns 1 if no_data else returns 0
units: convert to these units if included
NAME: New name of the Data Quantity
BKG: A 3d data structure containing the background counts.
FLOOR: Sets the minimum value of any data point to sqrt(bkg).
MISSING: value for bad data.
CREATED BY: Jasper Halekas
FILE: get_spec.pro
VERSION: 1.42
LAST MODIFICATION: 98/02/23
MOD HISTORY:
95/10/5 by REE (added bkg subtraction)
96/4/9 by JML now use index feature of get_* to walk through the data
96/5/6 Mods plus clean up.
NOTES: "LOAD_3DP_DATA" must be called first to load up WIND data.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_spec.pro)
FUNCTION: get_tspc(t)
INPUT:
t: double, seconds since 1970. If this time is a vector than the
routine will get all samples in between the two times in the
vector
KEYWORDS:
advance:
index: select data by sample index instead of by time.
times: if non-zero, return and array of data times
corresponding to data samples.
PURPOSE: returns a structure containing all data pertinent to a single
f+t & o+t spectra. See the file 3dp_help.doc for a more complete
description of the structure.
CREATED BY: Robert D. Campbell
LAST MODIFICATION: %W% %E%
NOTES: The procedure "LOAD_3DP_DATA" must be
called first.
(See /disks/aeolus/disk1/wind/source/idl/wind/get_tspc.pro)
FUNCTION: get_wind_times PURPOSE: To get an array of all the times loaded in memory for a given data type. INPUTS: STRING data type. OUTPUTS: array of time tags if successful, else 0D MODIFICATION HISTORY: Written 1995/09/22 By J. M. Loran
(See /disks/aeolus/disk1/wind/source/idl/wind/get_wind_times.pro)
PROCEDURE: help_3dp PURPOSE: Calls netscape and brings up our on_line help. One of the pages accessed by this on_line help provides documentation on all of our procedures and is produced by"MAKEHELP" INPUT: none KEYWORDS: MOSAIC: if set uses mosaic instead of netscape CREATED BY: Jasper Halekas FILE: help_3dp.pro VERSION: 1.6 LAST MODIFICATION: 95/10/06
(See /disks/aeolus/disk1/wind/source/idl/wind/help_3dp.pro)
PROCEDURE: init_wind_lib
PURPOSE:
Initializes common block variables for the WIND 3DP library.
There is no reason for the typical user to execute this routine as it is
automatically called from "LOAD_3DP_DATA". However it can be used to
overide the default directories and/or libraries.
RESTRICTIONS:
This procedure is operating system dependent! (UNIX only)
This procedure expects to find two environment variables:
WIND_DATA_DIR: the directory containing the master file: 'wi_lz_3dp_files'
please see the file help_3dp.html for information on creating this
file.
IDL_3DP_DIR: the directory containing the source code and the sub-
directory/file: lib/wind_lib.so
KEYWORDS: (used to overide defaults.)
WLIB: (string) full pathname of shared object code for wind data
extraction library. Default is $IDL_3DP_DIR/lib/wind_lib.so
MASTFILE: (string) full pathname of the 3DP master data file.
default is: $WIND_DATA_DIR/wi_lz_3dp_files
CREATED BY: Davin Larson
LAST MODIFICATION: @(#)init_wind_lib.pro 1.10 96/06/21
(See /disks/aeolus/disk1/wind/source/idl/wind/init_wind_lib.pro)
PROCEDURE load_3dp_data, time, delta_time,quality=quality PURPOSE: Opens and loads into memory the 3DP LZ data file(s) within the given time range. This must be called prior to any data retrieval! INPUTS: (optional, prompted if not provided) time: start time.string of the form: 'yy-mm-dd/hh:mm:ss' deltat; int,float or double: number of hours of data to load quality; set bits to determine level of packet quality. the following bits will allow packets with these possible problems through the decommutator filter: 1: frame contains some fill data 2: the following packet is invalid 4: packet contains fill data default is quality = 0 (most conservative option) CREATED BY: Davin Larson LAST MODIFICATION: @(#)load_3dp_data.pro 1.16 99/03/02
(See /disks/aeolus/disk1/wind/source/idl/wind/load_3dp_data.pro)
BATCH FILE: makehelp
NAME:
makehelp
PURPOSE:
Uses "MK_HTML_HELP2" to create an html help file
called 3dp_ref_man.html. "HELP_3DP" will call
up a browser and open our on_line help facility, which
provides a link to the page generated by this procedure.
INPUT: none
KEYWORDS: N/A
CREATED BY: Jasper Halekas
LAST MODIFICATION: @(#)makehelp.pro 1.22 99/02/10
(See /disks/aeolus/disk1/wind/source/idl/wind/makehelp.pro)
PROCEDURE: make_plot (batchfile) PURPOSE: makes summary plots daily when called by make_sum_plots script INPUT: none KEYWORDS: none CREATED BY: Jasper Halekas LAST MODIFICATION: @(#)make_plot.pro 1.18 97/09/30
(See /disks/aeolus/disk1/wind/source/idl/wind/make_plot.pro)
PROCEDURE: plot_orbit, data_name
PURPOSE: To do an xyplot of orbital or other data
INPUT: String associated with spacecraft position data quantity.
Default is 'GSE_pos_def'. (see "GET_ORBIT")
KEYWORDS:
ZPLOT: will produce an x-z plot, rather than x-y
BOW: structure that determines bow shock parameters.
TLABEL: Draws a label for each time value specified.
FREQ: if set will draw a star every freq days
INIT_FREQ: first date to label. (date string: yy-mm-dd)
DATE_LAB: if set will label a date every date_lab days
INIT_DATE_LAB: first date to start labeling. (date string: yy-mm-dd)
LIMITS: A limit structure that defines plot limits.
(see "TPLOT/3dp_ref_man.html#OPTIONS">OPTIONS", "XLIM" or "YLIM")
TRANGE: Two element vector of time values giving the time range.
(see "TPLOT/3dp_ref_man.html#GETTIME">GETTIME")
DAT3D: A data structure that contains some of the following:
magf: 3 components of magnetic field.
sc_pos: 3 components of spacecraft position.
vsw: 3 components of solar wind velocity.
Modified by: Peter Schroeder 97-5-21
Written by: Davin Larson 95-9-12
Modified from xyplot.pro by Jasper Halekas.
FILE: plot_orbit.pro
VERSION: 1.17
LAST MODIFICATION: 99/03/02
(See /disks/aeolus/disk1/wind/source/idl/wind/plot_orbit.pro)
PROCEDURE: setfileenv PURPOSE: Sets up environment variables giving information on the location of master index files and file paths of WIND 3DP data. CREATED BY: Peter Schroeder VERSION: @(#)setfileenv.pro 1.11 98/04/13
(See /disks/aeolus/disk1/wind/source/idl/wind/setfileenv.pro)
WIND 3D Plasma startup procedure. Calling procedure: @start3dp PURPOSE: Initializes 3DP code. CREATED BY: Davin Larson LAST MODIFICATION: @(#)start3dp.pro 1.10 97/02/10
(See /disks/aeolus/disk1/wind/source/idl/wind/start3dp.pro)
COMMON BLOCK: wind_com PURPOSE: Common block for wind procedures CREATED BY: Davin Larson LAST MODIFICATION: @(#)wind_com.pro 1.5 95/09/06
(See /disks/aeolus/disk1/wind/source/idl/wind/wind_com.pro)