Study 000653:

Acronym:FlareRespAtls_trst

This is a flare response with a nearly full CCD readout, the edges of the ccd have been cut out. This study provides a high cadence and large wavelength coverage for flare observations. As such, it enables the use of many lines not typically observed in flare responses. This study uses a dummy raster that has the same pointings and steps and spectral coverage but only 8 pixels high. This dummy raster is used to space out the response allowing for a longer flare study without the associated increase in data.

This study is intended for flare response use and not for other targets. A nearly full CCD readout including robust flare diagnostics is used. The study runs 6 repeats of the full raster during the response spaced out into a group of 3, 2, and 1 by 2 repeats each of the dummy study, for a duration of 90 minutes.

Target: Flare Response
Exposure Time: 10s (0 delay)
Raster:Scanning 
Slit:2"
FOV: 122"x160" (3" steps)
Raster Duration: 10(6)x repeats (3-2-2-2-1)
Volume: 381300.03 kBits
Rate: 74.1954 kBits/s
Compression:JPEG85

The primary lines in each data window are:

Window	    Wavelength	  Pixels
	    1		  181.75	672	# Short Wavelength Detector 174.26-189.22
	    2		  199.67	936	# Short Wavelength Detector 189.24-210.07
	    3		  260.06  	776	# Long Wavelength Detector 251.42-268.68
	    4		  277.69	808  	# Long Wavelength Detector 268.70-286.65
	    
	    
Pointing:


Warning:

3" steps taken with 2" slit.